Firearms

Headspace, Explained: How to Check It and Why It Matters

November 15, 2026

If you reload or do your own gunsmithing, "headspace" is one of those words that gets thrown around a lot without much clarity on what it actually means or how to check it. Ultimate Reloader's Cam sits down with Ray Gross of Manson Precision Reamers to break the concept down to its basics and walk through the gauges that reloaders and gunsmiths actually use to verify it.

Snapshot

Cam and Ray Gross define headspace as the clearance between a fixed reference point in the chamber and the matching datum on a cartridge, the small gap that lets ammunition chamber and fire reliably across different rifles. They walk through how SAAMI and CIP define that measurement differently, then demonstrate how go, no-go, and other gauges work as pass/fail checks rather than precision measuring tools.

Key points

  • Headspace is clearance, not a fixed number. Gross explains it as the gap between the breech face and a datum point on the cartridge shoulder, which has to exist for reliable function, though competitive shooters sometimes run it tighter.
  • SAAMI vs. CIP measure differently. SAAMI gives a minimum and maximum window off a diameter point on the shoulder, while CIP measures out to the theoretical apex where the shoulder lines meet, a value marked "S" on CIP diagrams.
  • Gauges are pass/fail, not rulers. Gross stresses that a go gauge should let the bolt close and a no-go gauge should not; other dimensions on the gauge are deliberately undersized so only headspace is being tested.
  • Belted magnums headspace on the belt, not the shoulder. The two discuss how that generous SAAMI/CIP tolerance causes brass stretch, which is why companies like Peterson now make "Long" versions with tighter clearance for reloaders.
  • Rimmed cartridges are the simplest case. Headspace there is just the thickness of the rim, the same basic gauge style covering rifle and handgun rounds like .357 Magnum and .30-30.

Quick take

For anyone maintaining or building rifles without easy access to a gunsmith, this is a clear, no-nonsense explainer on a topic that's easy to get wrong. Ray Gross's manufacturing perspective adds real credibility to the gauge-use advice.

Watch the full video: Ultimate Reloader